The Basics of Assessment Validation: How to Validate Assessments

Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.

Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

As per the standards, two kinds of validation are required.

The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.

The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

Exploring the Two Types of Assessment Validation

What Does Assessment Validation Mean?

As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

This piece will highlight assessment tool validation.

How Assessment Tool Validation is Conducted

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

When Should You Conduct Assessment Tool Validation?

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- updating your resources
- your new training products get added on scope
- course gets reviewed against training product updates
- learning resources are identified as a risk during the risk assessment

The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.

How to Choose Training Products for Validation

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

What Do You Need for Assessment Tool Validation?

Learning Materials

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Assessment Validation Team

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

In total, your validation panel must have:

Current vocational competencies and relevant industry skills for the unit being validated

Current expertise and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or an equivalent successor

Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.

ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.

Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Essential Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Fundamental Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:

Practice Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following activities at least once with two different babies under 12 months old website in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

change diapers

bottle preparation, bottle-feeding babies, and cleaning equipment

prepare solids and feed infants

appropriately respond to infant signs and cues

prepare and settle babies for rest

monitor and promote age-appropriate physical exploration and gross motor skills

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

Full or Not Competent

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?

Answers can include:

Required resources

Associated expenses

Time required for activities

Assigned functions and responsibilities

If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – work area isolation, engineering controls, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, use of engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolating, use of engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.